MKX AWD V6-3.5L (2007)
10. Install new VCT housing seals.
11. CAUTION: Make sure the dowels on the VCT housing are fully engaged in the cylinder head prior to tightening the bolts.
Install the LH VCT housing and the 3 bolts.
^
Tighten in the sequence shown to 10 Nm (89 inch lbs).
12. CAUTION: Make sure the dowels on the VCT housing are fully engaged in the cylinder head prior to tightening the bolts.
Install the RH VCT housing and the 3 bolts.
^
Tighten in the sequence shown to 10 Nm (89 inch lbs).
