MKX AWD V6-3.5L (2007)
E4
Normal Operation
The occupant classification sensor module communicates with the scan tool through the high speed controller area network (HS-CAN). Circuits
VDB04 (WH/BU) (HS-CAN +) and VDB05 (WH) (HS-CAN -) provide the network connection to the occupant classification sensor module. The
occupant classification sensor module shares the HS-CAN network with the PCM, the ABS module, the four wheel drive (4WD) control module (if
equipped), the restraints control module (RCM), the adaptive front lighting module (if equipped), the steering angle sensor module (if equipped) and
the instrument cluster. Voltage to the occupant classification sensor module is supplied by circuit CBP46 (WH/BU). Ground is supplied by circuit
GD143 (BK/VT).
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
-
Occupant classification sensor module
Test F: The Adaptive Front Lighting Module Does Not Respond To The Scan Tool
PINPOINT TEST F: THE ADAPTIVE FRONT LIGHTING MODULE DOES NOT RESPOND TO THE SCAN TOOL
F1