MKX AWD V6-3.5L (2007)
5. Install the brake disc.
6. Position the brake caliper and anchor plate assembly and install the 2 bolts.
^
Tighten to 133 Nm (98 ft. lbs).
7. Using a suitable installation tool, install the halfshaft into the wheel hub.
8. CAUTION: Do not tighten the halfshaft nut with the vehicle on the ground. The nut must be tightened to specification before the vehicle
is lowered onto the wheels. Wheel bearing damage will occur if the wheel bearing is loaded with the weight of the vehicle applied.
NOTE: Apply the brake to keep the halfshaft from rotating.
Install the halfshaft hub seal, washer and nut.
^
Tighten to 225 Nm (185 ft. lbs).
9. Install the wheel and tire assembly.
10. Check and if necessary, adjust the alignment.