MKX AWD V6-3.5L (2007)
7. Connect the TR sensor electrical connector.
1
Connect the electrical connector.
2
Slide the locking tab over.
8. Connect the TSS sensor electrical connector.
9. Inspect the transaxle side cover seal for damage and install new if necessary.
10. CAUTION: Inspect the 20 pin solenoid body connector seal to make sure that the seals is on the inside of the main control cover.
Transmission fluid leak will occur.
NOTE: Install the stud bolts in the locations noted during disassembly.
Install the transaxle side cover and install the 14 bolts.
1
Bolt location
2
Studbolt location