MKZ AWD V6-3.5L (2008)
Brake Master Cylinder: Service and Repair
Removal and Installation
Brake Master Cylinder - 2.3L and 3.0L
Brake Master Cylinder - 2.3L and 3.0L
Material
NOTE: Automatic transmission shown, manual transmission similar.
Removal and Installation
WARNING: Do not use any fluid other than clean brake fluid meeting manufacturer's specification. Additionally, do not use brake fluid that
has been previously drained. Following these instructions will help prevent system contamination, brake component damage and the risk of
serious personal injury.
WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety
Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.
