MKZ AWD V6-3.5L (2008)
3. Remove the A/C tube retaining clamp bolt.
^
To install, tighten to 8 Nm (71 lb-inch).
4. Remove the 2 A/C tube retaining clamp bolts.
^
To install, tighten to 10 Nm (89 lb-inch).
5. Remove the nut, bolt and position the engine coolant degas bottle aside.
^
To install, tighten to 9 Nm (80 lb-inch).
6. Detach the power steering hose retainer from the engine mount brace.
7. Remove the bolt and the ground wire from the engine mount brace.
^
To install, tighten to 10 Nm (89 lb-inch).
8. Remove the 3 bolts and the engine mount brace.
^
To install, tighten to 25 Nm (18 lb-ft).
9. Remove the 4 engine mount-to-engine nuts.
^
To install, tighten the bolts to 55 Nm (41 lb-ft) and the nut to 63 Nm (46 lb-ft).
10. Using the special tool, lower the engine 25 mm (1 inch).
11. NOTE: It is necessary to reposition the A/C tubes to remove the engine mount.
Remove the nut, the 2 bolts and the engine mount.
^
To install, tighten the bolts to 55 Nm (41 lb-ft) and the nut to 63 Nm (46 lb-ft).
12. To install, reverse the removal procedure.
