MKZ AWD V6-3.5L (2008)
50. Install 2 of the oil pan bolts (finger tight) into the 2 threaded holes in the oil pan in the following sequence.
1
Alternately tighten the 2 bolts one turn at a time until the oil pan-to-cylinder block seal is released.
2
Remove the oil pan.
51. CAUTION: Only use a 3M Roloc(R) Bristle Disk (2-in white, part number 07528) to clean the engine front cover and oil pan. Do not use
metal scrapers, wire brushes or any other power abrasive disk to clean the crankshaft rear seal retainer plate. These tools cause scratches
and gouges that make leak paths.
Clean the engine front cover and oil pan using a 3M Roloc(R) Bristle Disk (2-in white, part number 07528) in a suitable tool turning at the
