MKZ AWD V6-3.5L (2008)
10. Remove the special tools (alignment pins).
11. NOTE: Do not tighten the bolt at this time.
Install the engine mount bracket and the 3 bolts.
12. CAUTION: Do not expose the Motorcraft High Performance Engine RTV Silicone to engine oil for at least 90 minutes after installing the
engine front cover. Failure to follow this instruction may cause oil leakage.
Install the remaining engine front cover bolts. Tighten all the engine front cover bolts and engine mount bracket bolts in the sequence shown in 2
stages:
^
Stage 1: Tighten bolts 1 thru 22 to 10 Nm (89 lb-inch) and bolts 23, 24 and 25 to 15 Nm (11 lb-ft).
^
Stage 2: Tighten bolts 1 thru 22 to 24 Nm (18 lb-ft) and bolts 23, 24 and 25 to 75 Nm (55 lb-ft).
