MKZ AWD V6-3.5L (2008)
60. NOTE: LH shown, RH similar.
Install the tie-rod ends and nuts.
^
Tighten to 48 Nm (35 lb-ft).
^
Install new cotter pins.
61. Install the engine roll restrictor-to-subframe through bolt.
^
Tighten to 90 Nm (66 lb-ft).
AWD vehicles
62. Line up the index marks on the rear driveshaft to the index marks on the PTU flange made during removal and install the 4 bolts (3 shown).
^
Tighten to 70 Nm (52 lb-ft).
