MKZ AWD V6-3.5L (2008)
Exhaust Resonator: Service and Repair
Resonator - 3.5L
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove and discard the 2 exhaust Y-pipe-to-resonator nuts.
^
Discard the gasket.
^
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the Torca(R) clamp.
4. Separate the resonator from the muffler and tailpipe and remove the resonator.
5. To install, reverse the removal procedure.
^
Install a new gasket and nuts.
6. Start the engine and check for exhaust leaks.
