MKZ AWD V6-3.5L (2008)
3. NOTE: Failure to hold the selector lever, while loosening or tightening the manual control lever, will transmit rotational torque to the TR switch
causing internal damage.
Remove the TR sensor (the automatic transaxle is removed for clarity).
1
Remove the nut and the manual control lever.
2
Remove the bolts and the TR sensor.
Installation
1. NOTE: Failure to hold the selector lever, while loosening or tightening the manual control lever, will transmit rotational torque to the TR switch
causing internal damage.
NOTE: Do not fully tighten the bolts at this time.
Install the TR sensor and loosely install the bolts (the automatic transaxle is removed for clarity).
2. Using the special tool, align the TR sensor and tighten the bolts.
^
Tighten to 10 Nm (89 lb-in).
