MKZ AWD V6-3.5L (2008)
All vehicles
7. Disconnect the transmission control (TC) switch electrical connector and remove the wiring harness retainer from the selector lever housing.
8. NOTE: Selector lever removed for clarity.
Release the 3 tabs and remove the PRNDL bezel, selector lever knob and knob bezel.
Installation
All vehicles
1. CAUTION: Be sure that the override lever is inserted in the override lever guide or the shift interlock override button will not work
correctly.
NOTE: Selector lever removed for clarity.
Position the TC switch wiring harness through the selector lever knob bezel and the PRNDL bezel and install the PRNDL bezel on the selector
lever.
^
Position the override lever in the override lever guide.
^
Make sure that the 3 locking tabs are locked in place.
