MKZ AWD V6-3.5L (2008)
9. Position the LH splash shield in place and install the 4 screws.
3.0L engine
10. Install the 2 transaxle support insulator bolts.
^
Tighten to 90 Nm (66 lb-ft).
11. Remove the special tools.
9. Position the LH splash shield in place and install the 4 screws.
3.0L engine
10. Install the 2 transaxle support insulator bolts.
^
Tighten to 90 Nm (66 lb-ft).
11. Remove the special tools.