MKZ AWD V6-3.5L (2008)
Shift solenoid F and pressure control solenoid B (PCB)
9. Remove the battery tray.
10. Remove the 11 side cover bolts and remove the cover.
^
Using a suitable tool, separate the bead of sealer.
11. Clean the silicone from the side cover and transaxle case surfaces thoroughly with metal surface cleaner.
12. Disconnect the electrical connectors.
1
Disconnect the electrical connector for the pressure control solenoid B.
2
Disconnect the electrical connector for the shift solenoid F.
13. Remove the bolt and the ground wire.