MKZ AWD V6-3.5L (2008)
Main Control
13. NOTE: The thin longer springs are for the neutral and drive accumulator.
NOTE: Accumulator bore and pistons are matched by depth; some pistons may have steps. Install the pistons in the same bore as removed.
Install the accumulator pistons and springs.
1
Accumulator 1 and 2.
2
Accumulator N and D.
14. CAUTION: Make sure that the manual valve is in the manual control valve shift lever.
NOTE: Do not fully tighten the main control valve bolts at this stage.
Install the main control valve body and loosely install the bolts.
15. Tighten the main control valve body retaining bolts.
^
Tighten the bolts in the sequence shown.
-
Tighten to 9 Nm (80 lb-in).