MKZ AWD V6-3.5L (2008)
5. Remove 3 PCM bracket nuts and the PCM bracket.
^
To install, tighten to 10 Nm (89 lb-in).
6. Disconnect the clutch master cylinder-to-clutch slave cylinder hydraulic tube.
^
To install, tighten to 17 Nm (13 lb-ft).
7. Disconnect the clutch master cylinder-to-clutch reservoir hose.
8. Remove the clutch master cylinder nut.
^
To install, tighten to 21 Nm (15 lb-ft).
9. Remove the clutch master cylinder assembly.
10. To install, reverse the removal procedure.
11. Bleed the clutch hydraulic system.
Clutch Slave Cylinder
Clutch Slave Cylinder