MKZ AWD V6-3.5L (2008)
13. Remove the 10 door module bolts and the window regulator motor electrical connector.
-
To install, tighten to 11 Nm (8 lb-ft).
14. Remove the front door module. If installing a new door module, transfer parts as necessary.
15. To install, reverse the removal procedure.
-
For MKZ only, if installing a new LH or RH front window motor, it must be initialized. If installing the original front window motor, it must
be de-initialized, then initialized. For additional information, refer to Window Motor Initialization. See: Power Window Motor/Testing and
Inspection
