MKZ AWD V6-3.5L (2008)
Windshield Washer Hose: Service and Repair
WASHER HOSE REPAIR
1. Locate and verify the leaking washer hose.
2. Cut the hose cleanly and remove the damaged portion of the washer hose.
3. Install a windshield washer hose adapter between the cut ends of the hose.
4. NOTE: In difficult cases, clamping may be required.
Install a segment of 6.4 mm (0.25 in) inside diameter black rubber hose over the ends of the washer hose, and clamp both ends of the rubber hose
using spring clamps.
