MKZ AWD V6-3.5L VIN T (2007)
Removal
CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning
gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
1. Remove the RH ignition coils.
2. Remove the power steering fluid reservoir.
3. Disconnect the power steering pressure (PSP) switch electrical connector.
4. Disconnect the RH catalyst monitor sensor electrical connector and retainer.
5. Remove the PSP hose bracket nut from the valve cover stud bolt and position the bracket aside.