Navigator 2WD V8-5.4L (2007)
Exploded View
Removal and Installation
NOTE: For Navigator, the LF/RF door power window regulator motor must be reinitialized whenever the LF/RF motor is removed from the vehicle.
1. Remove the front door trim panel.
2. Position the front door weathershield aside.
3. NOTE: Use a flat-blade screwdriver between the window regulator motor and window regulator assembly to hold the window regulator assembly
drum in place.
Remove the bolts and the front door window regulator motor.
1
Disconnect the electrical connector.
2
Remove the bolts.
-
To install, tighten to 7 Nm (62 lb-in).
4. To install, reverse the removal procedure.
-
For Navigator, reinitialize the LF/RF window regulator motor.
-
Cycle the window glass to make sure the gears engage.
