Navigator 2WD V8-5.4L (2007)
2. Remove the body mount bolt cover.
3. Remove the body mount nut.
-
To install, tighten to 55 Nm (41 lb-ft).
4. Loosen the remaining body mount bolts.
5. Raise the vehicle body enough to remove the body mount bolts.
-
To install, tighten to 55 Nm (41 lb-ft).
6. NOTE:
-
No lubricants of any kind are to be used during body mount installation.
-
Do not reuse body mount fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
To install, reverse the removal procedure.
