Navigator 2WD V8-5.4L (2007)
12. Remove the third row seat safety belt anchor and scrivet.
-
To install, tighten to 40 Nm (30 lb-ft).
13. Remove the rear quarter trim panel bolt.
14. Open the third row seat safety belt guide bolt cover and remove the safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
All vehicles
15. Remove the second row safety belt anchor.
-
To install, tighten to 40 Nm (30 lb-ft).
16. Remove the rear door scuff plate by pulling upward.
17. Fold the seat back of the third row seat to the full down position.