Navigator 2WD V8-5.4L (2007)
3. Tighten the rear disc brake caliper bleeder screws.
^
Tighten to 16 Nm (12 ft. lbs.)
4. Bleed the front disc brake calipers.
^
Place a box-end wrench on the RH front disc brake caliper bleeder screw.
^
Attach a rubber drain hose to the RH front disc brake caliper bleeder screw and submerge the free end of the tube in a container partially filled
with clean, specified brake fluid.
^
Open the bleeder screw and leave open until clear bubble-free brake fluid flows.
-
Repeat for LH front disc brake caliper.
5. Tighten the front disc brake caliper bleeder screws.
^
Tighten to 16 Nm (12 ft. lbs.)
