Navigator 2WD V8-5.4L (2007)
Connecting Rod: Specifications
Connecting Rod
Rod-to-pin clearance............................................................................................................................................. 0.009-0.0235 mm (0.0004-0.0093 inch)
Pin bore diameter................................................................................................................................................ 22.012-22.024 mm (0.8666-0.8671 inch)
Length (center-to-center).............................................................................................................................................................. 169.1 mm (6.6575 inch)
Maximum allowed bend............................................................................................................................................................ ± 0.038 mm (0.0015 inch)
Maximum allowed twist(a).......................................................................................................................................................... ± 0.05 mm (0.0020 inch)
Rod bearing
Bore diameter (with assembled liners)......................................................................................................... 53.049-53.027 mm)(2.0885-2.0877 inch)
Bearing-to-crankshaft clearance....................................................................................................................... 0.064-0.026 mm (0.0025-0.0010 inch)
Rod side clearance.................................................................................................................................................. 0.475-0.125 mm (0.0187-0.0049 inch)
(a) The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of
a 203 mm bar, 105.5 mm on each side of rod centerline.
Connecting Rod Bolts
Discard the bolts.
First pass .............................................................................................................................................................................................. 43 Nm (32 ft. lbs.)
Final pass ....................................................................................................................................................................................................... Tighten 105°
