lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

ABOUT US
Mode Door Actuator - Defrost/Panel/Floor Door|Page 7493 > < Mode Door Actuator - Defrost/Panel/Floor Door|Page 7491

Navigator 2WD V8-5.4L (2007)

Page 3
background image

Removal and Installation

1. Remove the audio unit.
2. Disconnect the RH temperature blend door actuator electrical connector.
3. Remove the 2 RH temperature blend door actuator screws.
4. Remove the RH temperature blend door actuator.
5. To install, reverse the removal procedure.

Temperature Blend Door Actuator - LH

TEMPERATURE BLEND DOOR ACTUATOR - LH

Mode Door Actuator - Defrost/Panel/Floor Door|Page 7493 > < Mode Door Actuator - Defrost/Panel/Floor Door|Page 7491