Navigator 2WD V8-5.4L (2007)
13. Attach the passenger side second row safety belt retractor D-ring cover.
-
Verify the safety belt retractor operates without excessive effort or binding.
14. Connect the passenger seat side air bag module electrical connector and install the passenger front seat cushion panel shield.
15. Connect the passenger air bag module electrical connector.
16. Close the glove compartment door.
-
If equipped, connect the glove compartment door dampener.
17. CAUTION: The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag
module.Match the electrical connector key to the keyway in the driver air bag module.Do not force the electrical connectors into the
driver air bag module.
Connect the horn switch electrical connector, then connect the 2 driver air bag module electrical connectors.
