Navigator 2WD V8-5.4L (2007)
Shift Interlock Solenoid: Service and Repair
Brake Shift Interlock Actuator - Column Shift
Brake Shift Interlock Actuator - Column Shift
Removal and Installation
1. Set the parking brake.
2. Remove the steering column shrouds.
3. Turn the ignition to the accessory position and apply the brake or actuate the brake shift interlock actuator (BSIA) override.
4. Put the selector lever into the NEUTRAL position.
5. Disconnect the BSIA electrical connector.
6. Remove the BSIA screw.
7. Gently pry the clip up and remove the BSIA.
