Navigator 2WD V8-5.4L (2007)
Differential Output Shaft Bearing: Service and Repair
Stub Shaft Pilot Bearing and Seal
Special Tool(s)
Material
NOTE: The stub shaft seals must be replaced whenever the halfshafts are removed.
1. Remove the halfshaft assembly.
2. NOTE: If removing the stub shaft pilot bearing oil seal only, engage the tangs of the special tool on the stub shaft pilot bearing oil seal.
Using the special tools, remove and discard the stub shaft pilot bearing and the stub shaft pilot bearing oil seal.
1
Firmly engage the tangs of the special tool on the stub shaft pilot bearing.
2
Remove and discard the bearing and the stub shaft pilot bearing oil seal.
