Navigator 2WD V8-5.4L (2007)
Wheel Bearing: Service and Repair
Front
Wheel Hub
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in
major service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of
these parts.
1. Disconnect the wheel speed sensor electrical connector.
2. With the vehicle in NEUTRAL, position it on a hoist.
3. Remove the wheel speed sensor harness bracket bolt and detach the harness from the retainers.