Navigator 2WD V8-5.4L (2007)
7. Loosen the window glass clamp bolts.
-
To install, raise the window glass until it stalls in the UP position. Tighten the window glass clamp bolts to 11 Nm (8 lb-ft).
8. NOTE: Secure the front window glass in the full UP position.
Secure the front window glass with tape to the front door frame.
9. Position the interior door handle aside.
1
Remove the cable conduit fitting from the carrier assembly.
2
Lift upward on the interior door handle retaining bracket and pivot the interior door handle out of the bracket.
3
Remove the cable from the door handle.
10. Release the crash sensor harness pin-type retainers.
