Navigator 2WD V8-5.4L DOHC VIN R (2001)
Multifunction Electronic Control Modules: Service and Repair
Generic Electronic Module
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Prior to removal of the Generic Electronic Module (GEM), it is necessary to upload module configuration information to a
diagnostic tool. This information needs to be downloaded into the new module once installed.
2. Remove the steering column cover.
3. Remove the (A) bulkhead electrical connectors from the (B) instrument panel fuse junction panel.
4. Remove the (A) instrument panel fuse junction panel bolts and remove the (B) interior fuse junction panel nuts.
5. Disconnect the (A) Generic Electronic Module (GEM) electrical connectors from the (B) GEM.
