Navigator 2WD V8-5.4L DOHC VIN R (2001)
Hood Latch: Service and Repair
REMOVAL
NOTE: Expedition shown, Navigator similar.
1. Raise and support the hood.
2. Disconnect the hood latch release handle and cable.
3. Remove the hood latch.
1
Remove the bolts.
2
Disconnect the hood latch cable from the hood latch.
3
Remove the hood latch.
INSTALLATION
NOTE: Expedition shown, Navigator similar.
1. Install the hood latch.
1
Position the hood latch.
2
Connect the hood latch cable to the hood latch.
3
Finger-tighten the bolts.
2. Connect the hood latch release handle and cable.
3. Close the hood.
NOTE: The radiator grille may need to be removed to tighten the hood latch bolts.
4. Align the hood flush with the fenders and tighten the hood latch bolts.
^
If necessary, use Multi-Purpose Grease F5AZ-19G209-AA (aerosol) or equivalent meeting Ford specification ESR-M1C159-A to lubricate the