Navigator 2WD V8-5.4L DOHC VIN R (2001)
10. Remove the C-pillar trim panel.
^
Remove the rear door opening weather seal.
^
Remove the C-pillar trim panel.
NOTE: Remove the upper attachments followed by the lower attachment and the lower rear hook.
11. If equipped, remove the third row safety belt guide.
1
Lift the cover.
2
Use Safety Belt Bolt Bit to remove the safety belt guide bolt.
3
Remove the third row safety belt guide.
12. Remove the D-pillar trim panel.
^
Remove the liftgate door opening weather seal.
NOTE: Remove the lower hook attached to the quarter trim panel, followed by the top attachment, and then the lower rear attachment.
