Navigator 2WD V8-5.4L DOHC VIN R (2001)
8. If equipped, connect the seat back heating element to the center section of the seat back foam.
1
Install commercially available double-sided tape.
2
Connect the element to the tape.
9. If equipped, position the seat back heating element into the recess in the seat back foam.
10. If equipped, connect the seat back heating element to the bottom section of the seat back foam.
1
Install commercially available double-sided tape.
2
Connect the element to the tape.
11. Insert the front seat back frame into the front seat back foam.
12. Position the front seat back trim cover and connect the hook and loop strips.
13. On low back bucket seats, install the headrest guide sleeves with the pin holes toward the center of the seat.
