Navigator 2WD V8-5.4L DOHC VIN R (2001)
^
Connect the seat cover J-clips.
^
Install the hog rings and listing wires.
^
Connect the hook and loop fastener.
6. Install the safety belt buckle divider.
7. Check the restraint system for correct operation.
Seat-Cushion, Third Row
Safety Belt Bolt Bit
SPECIAL TOOL(S)
DISASSEMBLY
1. Disassemble the third row seat.
2. Remove the tether anchor.
1
Remove the bolt.
2
Remove the tether anchor.