Navigator 2WD V8-5.4L DOHC VIN R (2001)
2
Disconnect the lower TED electrical connector.
3
Cut the zip-tie and remove the lower TED.
4
Remove the screws and remove the lower TED mounting bracket.
4. Remove the climate control module (if equipped).
1
Disconnect the climate control module.
2
Remove the screws.
3
Remove the climate control module.
5. Pull out and remove the foam duct (if equipped).
6. Remove the pin-type retainers, retaining clips and remove the climate control harness (if equipped).
7. Release the seat cushion trim cover J-clips.