Navigator 2WD V8-5.4L DOHC VIN R (2001)
1. Remove the center instrument panel finish panel.
2. If equipped, disconnect the transfer case rotary control switch electrical connector.
3. Remove the center panel register(s).
1
Remove the screws.
2
Pry back the lock tabs.
3
Remove the panel register.
INSTALLATION
1. To install, reverse the removal procedure.
RH
REMOVAL
1. Remove the instrument panel. Refer to: Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and
Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation
