Navigator 2WD V8-5.4L DOHC VIN R (2001)
Control Assembly: Service and Repair
With Manual Climate Control
REMOVAL
1. Disconnect the battery ground cable.
2. Detach the center instrument panel finish panel.
1
Rotate the center instrument panel finish panel vents inward.
2
Through the vent openings, grasp the center instrument panel finish panel and pull outward.
3
Detach the center instrument panel finish panel.
3. Remove the screws from the electronic automatic temperature control (EATC) module.
4. Remove the EATC module.
1
Disconnect the electrical connectors.
2
Remove the nuts.
3
Disconnect the vacuum harness connector and remove the EATC module.
INSTALLATION
1. To install, reverse the removal procedure.
