Navigator 2WD V8-5.4L DOHC VIN R (2001)
Refrigerant Pressure Sensor / Switch: Service and Repair
Pressure Cutoff Switch
REMOVAL
1. Disconnect the electrical connector.
2. Remove the A/C pressure cut-off switch.
INSTALLATION
1. To install, reverse the removal procedure.
1
Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or equivalent,
meeting Ford specification WSH-M1C231-B.
