Navigator 2WD V8-5.4L DOHC VIN R (2001)
Power Steering Line/Hose: Service and Repair
Hose - Power Steering Return
Removal
1. WARNING: The electrical power to the air suspension must be shut off prior to hoisting, jacking or towing an air suspension vehicle.
This can be accomplished by turning off the air suspension switch located in the RH kick panel area. Failure to do so can result in shifting
of the vehicle during these operations.
Raise and support the vehicle.
2. Disconnect the power steering return hose. Drain the power steering system.
3. Lower the vehicle.
4. Disconnect and remove the power steering return hose.
Installation
1. Follow the removal procedure in reverse order.
2. Fill and bleed the power steering system and check for leaks.
