Navigator 2WD V8-5.4L DOHC VIN R (2001)
Throttle Cable/Linkage: Service and Repair
Cable Bracket
REMOVAL
1. Remove the accelerator control splash shield bolts and remove the splash shield.
2. Disconnect the accelerator cable from the throttle lever.
1
Rotate the throttle lever forward.
^
Slide the accelerator cable end from the throttle lever.
3. Depress the locking tabs and remove the accelerator cable from the accelerator cable bracket.
4. Disconnect the speed control cable. Refer to Cruise Control.
5. Remove the spring from the accelerator cable bracket.