lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seat Belt|Removal and Installation|Page 7637 > < Seat Belt|Removal and Installation
Page 2
background image

AT LEAST ONE MINUTE. BE SURE TO DISCONNECT AUXILIARY BATTERIES AND POWER SUPPLIES (IF EQUIPPED).

2

Deactivate the supplemental restraint system (SRS).  See: Testing and Inspection/Component Tests and General Diagnostics/SRS Deactivation
and Reactivation

WARNING:  TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, NOTES,
AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM DEACTIVATION/REACTIVATION PROCEDURE.

2. Remove the D-ring, cover and B-pillar trim panel.  See: Testing and Inspection/Component Tests and General Diagnostics/SRS Deactivation and

Reactivation

3. Remove the B-pillar trim insert and route the belt through the trim.

4. Pull out the pin-type retainers and remove the web guide.

5. Using the special tool, remove the belt anchor.

Seat Belt|Removal and Installation|Page 7637 > < Seat Belt|Removal and Installation