Navigator 2WD V8-5.4L DOHC VIN R (2001)
2. Remove the safety belt guide nut. Remove the safety belt guide.
3. Remove the quarter trim panel.
4. Using the special tool; remove the safety belt anchor bolt.
5. Remove the center safety belt retractor.
1
Using the special tool, remove the bolt.
2
Remove the retractor.
INSTALLATION
1. To install, reverse the removal procedure.
^
Tighten all nuts and bolts to specification.
^
Check the active restraint system for correct operation.
Third Row Safety Belt and Retractor
Safety Belt Bolt Bit
SPECIAL TOOL(S)