Navigator 2WD V8-5.4L DOHC VIN R (2001)
5. NOTE: Place the steering gear sector shaft dust seal on Sector Shaft Seal Replacer so the raised lip is toward the tool.
Use Sector Shaft Seal Replacer to install the sector shaft dust seal.
^
Lubricate the steering gear sector shaft dust seal; use Multi-Purpose Grease DOAZ-19584-AA or equivalent meeting Ford specifications
ESB-M1C93-B and ESR-M1C159-A.
6. Remove the steering gear housing from Bench Mounted Holding Fixture.
7. Position the input shaft bearing in the valve housing and use Input Shaft Bearing/Seal Tool Set and a press to seat the bearing.
8. Use Input Shaft Bearing/Seal Tool and a press to seat the power steering gear input shaft seal.
9. Install the input shaft snap ring.
