Navigator 2WD V8-5.4L DOHC VIN R (2001)
5. Remove the upper ball joint castle nut.
1
Remove and discard the cotter pin.
2
Remove the nut.
6. Use the Pitman Arm Puller to separate the ball joint from the front wheel spindle.
7. Remove the front suspension upper arm.
1
Remove the two nuts and the two bolts.
2
Remove the front suspension upper arm.
Installation
1. NOTE: Align the marks made during removal on the front suspension upper arm cams.
NOTE: The forward front suspension upper arm nut must be tightened first while the control arms are held at the curb position ride height.
