Navigator 2WD V8-5.4L DOHC VIN R (2001)
8. Twist the air spring solenoid and remove.
Installation
1. NOTE: Inspect the O-ring for damage and replace as necessary. Lubricate the solenoid seal area with Silicone Brake Caliper Grease and
Dielectric Compound D7AZ-19A331A or equivalent meeting Ford specification ESE-MlC171-A.
NOTE: Be sure the new air spring solenoid is fully seated into both stages of the air spring.
NOTE: After installing the solenoid, it is necessary to inflate the air suspension system.
NOTE: When installing the air lines, make sure the white air line is fully inserted into the fitting for correct installation.
To install, reverse the removal procedure.
