Navigator 2WD V8-5.4L DOHC VIN R (2001)
14. Remove the rear suspension upper arm assembly-to-rear axle bolt.
^
Repeat for the other side.
15. Lower the rear axle and remove the coil spring.
Installation
NOTE: Do not tighten any nuts or bolts until the rear suspension is raised so that the rear suspension lower arms are parallel to the ground. Once in
position, tighten all the nuts and bolts to specification.
1. Install the rear coil spring.
2. Position the rear suspension upper arm assemblies to the axle and install the bolts.
