Navigator 2WD V8-5.4L DOHC VIN R (2001)
7. Install the transmission fluid pan-to-case retaining bolts.
8. NOTE: To maintain initial driveshaft balance, align the marks on the driveshaft yoke and axle flange so they may be installed in their original
positions.
Install the driveshaft.
1
Position the driveshaft.
2
Install the four bolts.
9. Lower the vehicle.
10. Reconnect the battery ground cable.
11. Check fluid level, fill with clean automatic transmission fluid.
12. Check for correct operation.
