Navigator 2WD V8-5.4L DOHC VIN R (2001)
23. CAUTION: Install the driveshaft with new bolts. If new bolts are not available' apply Threadlock and Sealer EOAZ-19554-AA or equivalent
meeting Ford specification WSK-M2G351-A5 to the threads of the original bolts.
CAUTION: Align the index marks.
CAUTION: The driveshaft flange yoke fits tightly on the pinion flange pilot. To make sure that the yoke seats squarely on the flange, tighten the
bolts evenly in a cross pattern as shown.
Position the driveshaft flange yoke on the pinion flange with the index marks aligned, and install the bolts.
24. Note: If equipped with air suspension, reactivate the system.
Lower the vehicle.
