Navigator 2WD V8-5.4L DOHC VIN R (2001)
9. Using the special tool, remove the pinion bearing.
10. Note: Do not remove the pinion bearing cups from the differential housing unless the cups are damaged.
Using the special tools, remove the outer pinion bearing cup.
11. Using the special tools, remove the inner pinion bearing cup.
Installation
Note: This is the preferred method for installing the pinion bearing cups. If necessary, proceed to Using special tools 205-153, 205-024, and 205-D055.
Using special tool 205-024
1. Position the special tools and the inner and outer pinion bearing cups in their respective bores.
1
After placing the inner and outer bearing cups in their bores, place the special tool on the inner bearing cup.
2
Place the special tool on the outer bearing cup.
